Mixpack

The MIXPACK is a part of the MIXPACK line of portable powered PA systems. A 12" subwoofer and two 6.5" speakers get the sound pumping in seconds behind 600 watts of pure Class AB power.

MIXPACK doesn't stop with professional amplification and speakers. A six-channel mixer is included so you can connect everything from musical instruments to microphones to an iPod. Maybe your band is gigging or you are a DJ, live sound engineer or sound contractor looking for something you can set up quickly without sacrificing quality or power. Regardless of where the performance takes you, MIXPACK is easy to set up with all the right connections.  Stands are included so you can get the sound where it needs to go.

Once all your gear is connected to MIXPACK, you can go to work on fine tuning for the gig with MIXPACK's built-in 24-bit digital effects. We're not talking about ho-hum effects; these effects are designed in collaboration with Alesis, which has set the standard for DSP technology for nearly 30 years.  Effects include Reverbs, Stereo, Delay, Chorus, Reverb + Delay and Reverb + Chorus combinations. 16 total effects that make sure you are always ready for any room and any performance. There is also three-band EQ on each channel, two Aux sends with stereo returns, easy-to-read LED meters and Headphone output so you're ready for virtually any small to medium-sized show.

When you need to get in and out in a hurry with high-power, clarity and flexibility, MIXPACK is the portable PA choice of audio professionals. Also available are the 1000 Watt MIXPACK Pro and 350 Watt MIXPACK Express.

Technische Daten: 

Type: 3-Way Powered System Bi-Amp plus passive crossover into Satellite
Low Output Power: 150 W RMS Class AB
MID-HIGH-Output Power: 75 W + 75 W RMS Class AB
Peak Power Rating: 600 Watts Peak
Maximum SPL @ 1m 116.5dB Continuous:  - 119.5 dB Peak (calculated)
Frequency Response: 55 Hz - 20 kHz @ -10 dB
Impedance: Low-Mid / High Low 8 ohm - Mid / high 8 Ohm
Crossover Frequencies: Active 125 Hz at 12 dB / Oct - Passive 3000 Hz at 12 dB / Oct with Electronic Dynamic Protections
Amplifier Protections: Low-Mid / High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30Hz - 24dB / Oct - Limiter / Compressor
Low Frequency Device: 12" / 318 mm - 2" Voice Coil
Mid Frequency Device: 4×6.5" / 165 mm - 1.5" Voice Coil
High Frequency Device: 2 × 1" Compression Driver - 1" Voice Coil
Horn Coverage: H° × V° 80°H × 80°V
Enclosure: Plastic Reinforced Cabinet Polypropylene

MIXER Section
Microphone Input: Electronically balanced discrete input configuration
Frequency Response: 10Hz to 55KHz +/-3dB
Distortion: (THD&N) 0.04% at +4dBu 1KHz
Gain: 35 dB
SNR: (Signal to noise ratio) >94 dB
Line input: Electronically balanced 
Frequency Response: 10 Hz to 55 kHz +/- 3 dB
Distortion: (THD&N) 0.04% at +4 dBu 1 kHz
Gain: 15 dB

Stereo Input / Output
Line input: Unbalanced
Frequency Response: 10 Hz to 55 kHz +/-3 dB
Distortion: (THD&N) 0.04% at +4 dBu 1 kHz
 
Impedances
Microphone Input: 1.4 kOhm
Channel insert return: 2.5 kOhm
All other inputs: 10 kOhm or greater
Tape out: 1 kOhm
All other outputs: 120 Ohm

Equalization
Hi shelving: ±15 dB @ 12 kHz
Mid bell: ±15 dB @ 2.5 kHz
Low shelving: ±15 dB @ 80 Hz

DSP section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit
Type of effects: Reverbs, Stereo, Delay, Chorus, Reverb + Delay and Reverb + Chorus combinations
Presets: 16

Controls & Monitoring
16-position preset selector
Clip LED
Mute Switch with LED indicator

Main Mix Section
Noise (Bus noise)
Fader 0 dB channels muted: -89 dBu
Fader 0 dB all input channels assigned and set to unity gain: -85 dBu
Max output: 27dBu balanced
Controls: 22 dBu balanced 1/4" jacks
AUX Sends: Max out 22 dBu
Power Supply: AC - 220 / 240 V or AC - 100 / 120 Volt, with Switching Power Mode.

Dimensions (WxLxH): 1060mm x 700mm x 700mm
Weight: 94.8 lb